Suspicious Activity Detected

Share your voice

How to Convert a Linksys Router to an Ethernet Bridge
If you wish to connect to the DD-WRT Control Panel on the second router you will need to connect a patch network cable to one of the LAN Ports on the second router and the other end to one of your computers and navigate as follows:. Next, enter the username and password for the router. The IP address of the router will be something like You're now ready to connect your wired devices to the bridge router from anywhere in your home within range of your primary router. Save all of the settings you have changed and reboot the router for the changes to take effect. Share Share on Facebook. Remove the static IP address from your computer and re-enable automatic IP addressing.

Video of the Day

Popular Topics

This compound is a natural extract found in the leaves of the Malabar Tamarind plant. Pure Garcinia products also contain other natural GC extracts, such as Gorikapuli. However, the majority of the weight loss effects come from HCA.

The Initial Setup

Leave a Reply

Oct 11,  · Step 4: Connect an Ethernet cable from your computer to one of the LAN jacks on the bridge router, then set a static IP address on your computer. Use something like , so you'll be on the same subnet as the bridge router, which will have an IP address of use a speedtouch v6{for e.g} as your main router,connecting as many netgear DG's as you want all with DHCP disabled and slap em into bridge mode,thats all you need,them 2 different routers,no,repeaters no settings to be touched apart from disabiling DHCP on the Netgears and it bridges first time everytime. solved Setting up a All in one Modem/Router to bridge the modem part of the device and use the router part as a repeater solved Adapter or router used as bridge to steam HD content solved Use